Volvo Ignition Coils

Every Volvo car owner knows that in order for the engine to provide energy to the wheels, it needs electricity. An electrical spark is needed to convert the fuel inside the engine into heat and pressure to be used in moving the pistons. The Volvo vehicle utilizes a set of spark plugs to generate this electric spark, but the spark plugs require thousands of volts in order to create a spark. However, your car’s battery does not have sufficient voltage to carry on this task. So in order to deliver the thousands of volts to the spark plugs, your Volvo vehicle is outfitted with Volvo Ignition Coils.

 

The ignition coil or spark coil is a type of autotransformer that helps convert the low voltage from the car battery into the high voltage needed by the spark plugs inside the internal combustion engine. The ignition coil works along with the contact breaker to deliver this large amount of voltage. Older vehicles usually had a single large ignition coil to serve the spark plugs, but modern ignition systems found in cars today have two or more smaller coils with the ratio of one coil serving a single spark plug.

 

The ignition coils is necessary for the continued operation of the spark plugs that is why it should always be provided with regular care and maintenance. But when the ignition coils have become damaged, it must be replaced right away to avoid intermittent ignition performance. And when you are looking for a replacement Volvo Ignition Coil for your Volvo auto, be sure to check out our products. Here at Discount Volvo Parts, we offer a large collection of Volvo Ignition Coils and other parts and accessories for Volvo vehicles at cut-rate prices.

 

Ignition coil is a part of ignition system which is the most important elements of the system. This ignition coil is in charge for providing spark to the spark plugs. Its important job is to convert the low-voltage electrical current coming from the vehicle battery, which is usually around 12 volts to extremely high-voltage current around 30,000 volts, that's used to create the spark serves to initiate the internal combustion process that powers your vehicle.

 

This ignition coil works like an electrical transformer, it works by receiving a low-voltage current, which is 12v DC power that then, passes through a tightly coiled winding of heavy-gauge wire and converts it to 40KV. It is usually filled with oil to keep it cool. If there is any leak, or your car start to run very poorly, or your vehicle stopped running entirely, all these factors are signs that you must replace your ignition coil. If you have an ignition coil failure, your vehicle definitely will not run.

 

Replacing a worn-out coil in an older vehicle is a simple process, since the part is easily accessible. It's held in place on the outside of the engine block by a simple bracket. Use a socket wrench to loosen the coil bracket, and then remove the coil from its bracket. Subsequently, place the new coil in the bracket. Connect the wire leading from the vehicle battery to the positive post of the coil and the negative post on the coil is where the wire attaches that leads to the distributor. Reconnect the negative battery cable and start the engine to make sure the system is working.

 

Whenever you are looking for good replacement for your worn ignition coil, make it Volvo ignition coil. Volvo ignition coil is made from high quality and very reliable materials.